FAQ
Home > FAQ
  • 1、The type and cost of the ribbon

          The ribbon is very important when printing material, In general, the ribbon is good or bad, in addition to the decision of the life of the print head and also on to the print effect. Good ribbon, it is possible to protect the print head, resulting in the effect can be accurately attached in the paper above, is not easy to spread, and do not fall off easily. Main components ribbon on the ribbon material classification can simply be divided into the following three:
    1,Wax ribbon :waxes and carbon black (assuming the black ribbon) as the main material, the products as a coating material. Wax ribbon is the most economical cheap ribbon is mainly used for the printing of plain paper, and paper with wax ribbon must be noted that, to use the wax ribbon for surface feel a slight bump material does not apply to the surface is smooth as a mirror of materials such as PET material products. The wax ribbon accounted for about 70% of the market share, is generally used to print large paper label Jimmy prime products.
    2,Resin ribbon :If the print data must require anti-solvent resistant high temperature for chemical products, packaging, or must the high temperature for electrical heating parts, or must be printed in a special PET and other chemical products, it is recommended to use a resin ribbonbecause the resin component to be able to achieve the above requirements, but usually this ribbon prices comparison high, but the printing effect is still necessary to achieve the best printing and paper / printing medium collocation can level. 
    3,the mixture of wax and resin as the main material, the products as a coating material. Mixing proportion with the need to change, mainly used for the relatively smooth surface of the material is generally suitable for the more stringent requirements of the surface of products, such as ordinary consumable products marked its performance is combined with the advantages of the above two kinds of ribbon made.
    Shuo Fang ribbon Germany imports of high-grade resin carbon with raw materials to ensure the print is clear and beautiful, and durable difficult to corrosion. 
     

    1, 

  • 2、The bad habits of the customers used tube printer

    1,Tube randomly placed when printing, contaminated with dirt on the cylinder wall, resulting in damage to the print head and even the mechanical parts;
    2. Tube printer  continuous operation for a long time without pause to rest;
    3.Not clean tube print after you use  , no protection, placed at random; the bare mechanical print head in the air for these devices fouling;
    4,Do not turn off the power after you used , not the casing exit, do not pull the power connector, causing damage to the power supply components;
    5. Tube printer non-hand use, too complicated to use personnel;
    6,More harsh operating environment, resulting in life shortening; (dust, humidity, temperature, etc.)
    7,Process of using the jammed ribbon jammed tube is not in accordance with normal procedure exit but illegal operations to remove the jammed matter (hand pull with pliers, etc.);
    8,Tube printer  failure disassemble by yourself cause unnecessary damage;
    9,Add to Tube printer oil resulting in the print head greasy Print unclear;
    10, Not follow manual , resulting in Print ineffective or even damage
    Please check your company the use tube printer process in the absence of such bad habits, and try to put an end to. In order to ensure the life of the machine, please note the following:
    1,Make sure  that you use the tube  is clean, it is very important to protect the print head, the second is to maintain internal cleaning of your machine.
    2. Guarantee no external influences feed, the tube smooth entry into the machine.

     ;3,Do not dismantle the machine. tube printer is precision machinery, inexperienced personnel demolition may cause damage to the machine parts, and will lose the warranty to one year of treatment, such as abnormal operation of the machine, please contact your supplier immediately.
    4,After you used the tube printer ,put the tube printer into suitcase

  • 3、How to prolong the service life of the print head

     The print head is the most fragile tube printer device. It is like a car tire is a consumable, will eventually damage If you pay attention to maintenance, however, will be able to extend the life of the print head.
    1, pre- maintenance
    In order to play important role, it should be every two weeks or the three weeks  clean the print head,Note that when cleaning the print head to the need to prevent a hard object (such as rings, etc.) to prevent scratching the print head, and with grounded metal band or anti-static pad to prevent electrostatic damage to the print head.
    Firs Power off  tube printer, gently blow away the dust, then with 70% of the alcohol-soaked cotton swab, wipe the print head surface and tube pritner of the mechanical parts, such as: rubber roller, ribbon sensor. Multiple "reversal" key, side turn while wiping swab dirty do not reuse. Do not use any hard metal or tools (such as screwdrivers, etc.) to wipe or scrape the printhead pollutants.
    2, Factors that caused the premature failure of the print head.
     Friction- Label/ tube / ribbon through the long-term movement of the print head will wear the protective layer of the ceramic coating, the print head acupuncture (points) exposure and ultimately damage.
    3,In order to avoid scratches
    Periodically clean the print head and the use of high-quality smooth and thermal transfer ribbons with film backing layer to reduce friction;
    Minimize the pressure of the print head and print temperature;
    The width of the ribbon width than the label to prevent expose the print head label abrasions.
    The ribbon backing layer caused by dirty - print head thermal transfer ribbon pollution will need a high-temperature, high-pressure, high-speed high-set value: the accumulation of pollutants on the print head (pin) caused by heat transfer barriers affect print maplike quality; pollutants gradually increase print quality and print material looks dull or even damage to the print (pin).
    4, Caused by dirty To avoid ribbon back layer
    The need to use a thermal transfer ribbon to the back layer of protection, be sure to refer to the non-sticky ribbon ribbon, electrostatic dissipative and lubrication;
    Cleaning the rubber roller, you must select reverse, so as not to damage the print head;
    Be sure to use clean tube;
    The ribbon backing layer caused by dirty - print head thermal transfer ribbon pollution will need a high-temperature, high-pressure, high-speed high-set value: the accumulation of pollutants on the print head (pin) caused by heat transfer barriers affect print maplike quality; pollutants gradually increase print quality and print material looks dull or even damage to the print (pin).  Often do print head maintenance;
    We protect the print head film can be quick and easy to remove the print head garbage accumulate
    5, print head warranty
     
    Recommended to use the ribbon suppliers to achieve the best print results, and can reduce the wear on the print head;
    Lead to the damage of the print head on the use of the ink ribbon of the non-provided by suppliers, the supplier is not take any responsible.



Home | About Us | Product | News | Sell Net | Download | New Product | Links | ContactUs

Supvan Technology (Beijing) Co., Ltd. Address:4/F,Building 29-2B,Shangdi East Road,HaiDian District,Beijing,China

Email:supvan@126.com Phone:010-62968596 Cell Phone:0086-15001381242 Post Code:100085 Fax:010-62968219

京ICP备12039575号-1 京公网安备11010802011777

QQ客服热线